Mercury | RACE STERNDRIVE | 525 EFI | 0M953620 THRU 0M956326 | Engine Components(Cylinder Block And Camshaft)
| Ref | Description | Qty Required | Price | |
|---|---|---|---|---|
| 0 |
GASKET/SEAL SET, Engine Overhaul Part No: 843073A06 |
1 |
1,735.46 1,561.91 |
|
| 1 |
PARTIAL ENGINE ASSEMBLY Part No: 841178A05 |
1 | 0.00 | Not Available |
| 2 |
PLUG, Pipe - Allen Head (.250-18), Oil Gallery Rear Cam Plugs Part No: 32561 8M0204652 |
3 |
6.50 5.85 |
|
| 3 |
PIN, Dowel (.6206/.6211 x 1.20), Flywheel Housing Part No: 843379 |
2 | 0.00 | Not Available |
| 4 |
SENSOR, Coolant Temperature Part No: 805218T |
1 |
67.58 60.82 |
|
| 5 |
PIN, Dowel (.250) Bottom Of Block Part No: 843378 |
2 |
15.40 13.86 |
|
| 6 |
PLUG, (.375-18) Hex - Steel Part No: 36373 8M0204657 |
1 |
5.50 4.95 |
|
| 6 |
PLUG, (.375-18) Hex - Steel Part No: 36373 8M0204657 |
2 |
5.50 4.95 |
|
| 7 |
FITTING, (.375 Male To .125 Female) Part No: 64013 |
1 |
14.10 12.69 |
|
| 8 |
SENSOR, Pressure (0 - 100 PSI), Oil Part No: 881879011 881879T11 |
1 |
189.25 170.33 |
|
| 9 |
STUD, (.250-18/M10 Special), Knock Sensor Assembly Mount Part No: 862915 |
2 |
25.83 23.25 |
|
| 10 |
NUT, (M10) Brass/Nickel Plated Part No: 826292 |
2 |
4.00 3.60 |
|
| 11 |
SENSOR ASSEMBLY, Knock Part No: 878187 8M6003194 |
2 |
74.92 67.43 |
|
| 12 |
FITTING, (.250-18 x .62) Brass, Lower Side Of Block Part No: 36382 |
2 |
5.30 4.77 |
|
| 13 |
EXPANSION PLUG, (1.625) Part No: 34270 |
6 |
9.40 8.46 |
|
| 14 |
PIN, Dowel, .660 Relaxed Outside Diameter x .500 Part No: 845758 52190 |
4 |
10.50 9.45 |
|
| 15 |
PIN, Spring, Port Side - Timing Cover Part No: 843143 |
1 |
2.11 1.90 |
|
| 16 |
PIN, Dowel (.250) Timing Cover Part No: 843378 |
1 |
15.40 13.86 |
|
| 17 |
PLUG, (.250-18 x .410) Allen Head With Hole, Oil Gallery Part No: 845606 8M0044324 |
2 |
4.60 4.14 |
|
| 18 |
PLUG, Pipe (.125-27) Brass, Oil Gallery Part No: 328022 |
3 |
7.30 6.57 |
|
| 19 |
SCREW, (.312-18 x .620) Part No: 841389 |
2 |
1.60 1.44 |
|
| 20 |
RETAINER, Lifter Guide Part No: 845755 8M0050807 |
1 |
52.67 47.40 |
|
| 21 |
WASHER, (.320 x 1.00 x .120) Stainless Steel Part No: 63032 |
2 | 0.00 | Not Available |
| 22 |
SCREW, (.312-18 x 1.00) Part No: 35386 |
2 |
1.10 0.99 |
|
| 23 |
SUPPORT, Oil Pump Drive Part No: 842956 |
1 |
41.21 37.09 |
|
| 24 |
SCREW, (.312-18 x 1.50) Part No: 73657 |
1 |
3.30 2.97 |
|
| 25 |
SPACER Part No: 842963 |
1 |
34.49 31.04 |
|
| 26 |
DRIVE, Oil Pump Part No: 881669 8M0114791 |
1 |
105.92 95.33 |
|
| 27 |
WASHER, (.330 x .750 x .060) Stainless Steel Part No: 56720 |
1 |
1.70 1.53 |
|
| 28 |
NUT, (.312-18) Stainless Steel Part No: 82670910 |
1 |
6.90 6.21 |
|
| 29 |
EXPANSION PLUG Part No: 94140 |
1 |
4.80 4.32 |
|
| 30 |
LIFTER Part No: 849947T 849947T01 |
16 |
171.92 154.73 |
|
| 31 |
GUIDE, Lifter Part No: 845754 |
8 |
7.80 7.02 |
|
| 32 |
CAMSHAFT Part No: 840919T 8M0043065 |
1 |
1,579.73 1,421.76 |
|
| 33 |
LUBE, Camshaft (8 Ounces) Part No: 15875 |
0 | 0.00 | Not Available |
| 34 |
BEARING SET Part No: 85684 |
1 |
119.75 107.78 |
|
| 35 |
PIN, Dowel (.250) Part No: 843378 |
1 |
15.40 13.86 |
|
| 36 |
RETAINER, Gear Thrust Part No: 845941 |
1 |
25.17 22.65 |
|
| 37 |
SCREW, (.250-20 x .500) Part No: 845943 |
2 |
6.50 5.85 |
|
| 38 |
TIMING SET KIT Part No: 8M8023355 |
1 |
316.03 284.43 |
|
| 41 |
WHEEL, Sensor Target Part No: 843923 8M0050760 |
1 |
34.58 31.12 |
|
| 42 |
SCREW, (.312-18 x .750) Part No: 845942 8M0043993 |
3 |
1.60 1.44 |
|
| 43 |
SHIELD, Oil Intake Part No: 816073 871600 |
1 | 0.00 | Not Available |
| 44 |
VALVE, Relief Part No: 807211 |
1 |
24.75 22.28 |
|